Use and Care Manual

ASSEMBLY INSTRUCTIONS

STEP 7

-------------------------------------------

Attach the dome assembly to the Burner Assembly by

securing M5 Acorn Nuts (DD) to the Reﬂector Spacers

(CC), tighten with a wrench.

STEP 8

-------------------------------------------

Turn the Control Knob on the Burner to OFF. Lifting or

tilting the heater on its side, connect the 1.02 lbs. gas

tank (not included) to the Regulator (twist the gas tank

clockwise into the Regulator until tightened).

NOTE: The back hole can be used to guide the tank to

the connector.

M5 Acorn Nut (x4)