Use and Care Manual

STEP 5
-------------------------------------------
Lower the Guard (B) over the Emitter Screen (C) and insert
the feet of the Guard into the holes near the edge of the
Burner.
STEP 6
-------------------------------------------
Attach the two Domes (A) together using M5 x 8mm
Screws (EE) and M5 Nuts (FF).
NOTE: Use a wrench to hold M5 Nuts (FF) in place
while screwing in M5 x 8mm Screws (EE).
EE
A
FF
6
B
D
5
ASSEMBLY INSTRUCTIONS
12
M5 x 8 mm Screw (x4)
EE
M5 Nut (x4)
FF