Cuisinart Outdoor Grilling Products A WARNING For Outdoor Use Only {outside any surrender) A WARNING 1. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. 2. Read this instruction manual thoroughly before installing or servicing this equipment. 3. Allure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury or death.
Please call 1-866-994-6390 for any assistance SAFETY INFORMATION IMPORTANT: ALL INSTRUCTIONS AND SAFEGUARDS ON THIS SECTION MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY. A This griddle Is for outdoor use only, and shall not be used In a bulling, garage, or any other enclosed area. A Do NOT operate, light or use this appliance within 8 feet of walls, structures or buildings. A This griddle is NOT for commercial use. A This griddle is for use with liquid propane {LP) gas only.
SAFETY INFORMATION A The LP gas cylinder used with this appliance must be: T (a) Constructed and marked in accordance with the Specifications for LP-Gas Cylinders of the U.S. Department of Transportation or the National Standard of Canada, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and 18 in. Commission, as applicable; and 12.2 in. (b} Provided with a listed overfilling prevention device.
SAFETY INFORMATION A WARNING: This product can expose you to chemicals including Carbon Monoxide, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. A WARNING: We urge you to read this manual carefully and follow the recommendations enclosed. This will ensure you receive the most enjoyable and trouble-free operation of your new gas griddle. We also advise you retain this manual for future reference.
WHAT'S IN THE BOX COMPONENTS PART DESCRIPTION ary LU DESCRIPTION Qry Side Table A Lid s Brackets 2 (Right) Griddle Gas Tank ® Plate T Holder 1 Griddle Door ¢ Bfr’ldY ¢ v fi Handle 1 D Side Table v @ figg;rsol 3 E Grease Cup F Right Back Leg Right Front 8 Leg H Left Back Lee HARDWARE | Left Front PART P I Leg AA M6 Screw 41 J Side Panels 2 BB (]_I M5 Screw 8 K Heat Shield cc q:.
PARTS LIST PART DESCRIPTION Qry PART DESCRIPTION Qry 1 Vent Grip 1 28 Door 1 2 Lid Vent 1 29 Base Plate 1 3 Lid 1 30 Front Wheels 2 4 Lid Hook 1 31 Rear Wheels 2 5 Electrode 1 32 Magnet 1 6 Electrode 1 33 Door Catch 1 7 Electrode 1 34 Side Panels 2 8 Side Tables 2 35 Front Right Leg 1 9 Tool Holders 6 36 Back Right Leg 1 10 Side Table Brackets {left) 2 37 Front Leg 1 11 Side Table Brackets {right)| 2 38 Back Left Leg 1 12 Fire Box 1 39 Back Panel 1 13 Grease Cup 1 40 Heat Shield 1 14 Grease Cup Tray 1 41 Pa
ASSEMBLY PREPARATION THIS UNIT IS HEAVY, TWO PEOPLE ARE REQUIRED FOR SAFE ASSEMBLY| Some parts may contain sharp edges. Wear protective gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and use and care instructions before attempting to assemble and use. Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, DO NOT attempt to assemble the product.
ASSEMBLY INSTRUCTIONS AA 3. Assemble base plate (O} onto the right front leg (RF) and left front Leg (LF)} to the long tilde of the base plate using M6 screws (AA).
ASSEMBLY INSTRUCTIONS ) 5. Install Heat Shilled (K) in between the back panel and the front door’s frame using M4 screws (DD). b 6. Put the griddle body (C} onto the stand and align with screw holes on each leg. Secure the griddle body and the stand using M6 screws {AA) and washers (FF).
ASSEMBLY INSTRUCTIONS 7. Assemble the side table brackets (S and R) onto the griddle body using M6 screws (AA), M6 ‘Washers (FF), and M6 nuts (Il).
ASSEMBLY INSTRUCTIONS 9. Align the screw holes of the griddle plate support brackets {Q) on the rim of the griddle body. Secure them using M5 screws (BB) and M5 washers {EE).
ASSEMBLY INSTRUCTIONS 10. Place the griddle plate {B} on top of the griddle plate support brackets. 11. First, from the underside of the lid (A), rotate the lid hook until it connects with the screw. Second, place the lid on top of the griddle plate.
ASSEMBLY INSTRUCTIONS BB 13. Attach the door handle {W) to the griddle door using M5 screws {BB). Insert the door’s spring hinges Into the holes In the griddle door frame and the base plate.
ASSEMBLY INSTRUCTIONS 16. Install the paper towel holder (P} using the butterfly nut {GG). GG Cuisinart ie 17. Install the gas cylinder holder (T).
CONNECTING REGULATOR TO THE LP TANK This gas griddle is set to operate with Liquid Propane Gas comes with a high capacity hose and regulator assembly. (Note: Only use the pressure regulator and hose assembly supplied with the griddle or a replacement pressure regulator and hose assembly specified by the manufacturer). This assembly is designed to connect directly to a standard 20 |b. L.P. Tank. L.P. tanks are not included with the griddle. L.P. tanks can be purchased separately at an independent dealer.
CONNECTING REGULATOR TO THE LP TANK 1. Check the tank valve to ensure it has proper external mating threads to fit the hose and regulator assembly provided (Type 1 connection per ANSI 2. Make sure all burner knobs are in the OFF position. 3. Remove the protective cap from the LP tank valve and coupling nut. And inspect the valve connection port of the regulator assembly. Look for damage or debris. Remove any debris. Inspect hose for damage. Never use damaged or plugged equipment. 4.
CHECKING FOR LEAKS FOR YOUR SAFETY WHEN TO PERFORM A LEAK TEST: A Always perform leak tests outdoors Every time prior to lighting the griddle, ONLY in a well-ventilated area. even if purchased fully assembled. A DO NOT smoke during leak test. A Repeat every time the LP gas cylinder is refilled A DO NOT use an open flame to check or exchanged for gas leaks A Any time your griddle has been moved.
L.P. TANK INFORMATION Never use a dented or rusted L.P. tank or cylinder with a damaged valve. L.P. cylinders are equipped with an O.P.D. {Overfilling Prevention Device). The device shuts off the flow of gas to a cylinder after 80% capacity is reached. This limits the potential for release of gas when the cylinder is heated, averting a fire or possible injury. The L.P. cylinder must have a shut-off valve terminating in an L.P. gas supply cylinder outlet specified, as applicable, for connection No.
LIGHTING INSTRUCTIONS WARNING: 1. Read all instructions before lighting. 2. Make sure the gas control knob is in “OFF” position. 3. Compress the knob for three seconds to allow propane to flow into the burners. Slowly turn knob counterclockwise to “HIGH” position. Han The ignite will click and light the burner. 4. If ignition does not occur in 5 seconds, turn the gas control knob off, ‘ wait 5 minutes, and repeat steps 2 5. MATCH LIGHTING 1. Open lid before lighting 2.
CARE AND MAINTENANCE Always check that the outdoor cooking appliance area is clear and free from combustible material, gasoline and other flammable vapors and liquids before lighting. Regularly check and clean the adventurist tubes for insects and insect nests. Clogged tube can lead to a fire beneath the griddle. Regularly check that the flow of combustion and ventilation air is not obstructed.
CARE AND MAINTENANCE IGNITION In order to prevent cracking of the burner's ceramic ignition surfaces, never allow hard objects to the strike the ceramic ignition. This will cause the burners to malfunction. Care should be taken when inserting or removing the griddle plate and accessories into or from the griddle. If hard objects fall onto the ceramic ignition, it is likely to crack the ceramic. Damage resulting from failure to follow these steps is not covered under the warranty.
CARE AND MAINTENANCE CLEANING AND CARE Griddles are remarkably easy to keep clean. After you’ve completed your first cook you'll want to spray down the hot surface with water and scrape debris away. The steam from the water on the hot surface will help release tough debris. Scrape the residue down into the grease cup. Turn the griddle off and let the surface cool. While it cools you'll want to remove and clean out the grease cup. Doing this each time will ensure you have no spill over the next time.
CARE AND MAINTENANCE Cleaning Main Burner To prevent flash backs and good performance of burner, the procedure below should be followed at least once a month in late summer or early fall when spiders are most active or when your griddle has not been used for a period of time: 1. Turn off at control knobs and LP cylinder. 2. Remove the griddle surface. 3. Remove the screws from the rear of the burners. Detach ignition wire from the ignition pin by hand only. DO NOT use tool. Then Lift burner slowly.
TROUBLE SHOOTING Many solutions given here can make your riddling experience safer and more enjoyable. You can also call consumer care department at 1-866-994-6390 from 9:00 am to 8:00 pm Eastern time, Monday through Friday for assistance. PROBLEM Griddle will not The ignition wire came off the ignitable. 2. The distance between the ignition pin and the burner is greater than 5/32 in. 3/16 in. CORRECTIVE ACT 1. Reconnect the ignition wire. 2.
Ware and Replacement Parts This warranty covers defects in parts and workmanship for a period of 3 years from the original purchase date. Any damage claim regarding the enameling must be submitted within 30 days of purchase to be covered by the warranty. The following conditions are NOT covered by this warranty: Unevenness and color variations in the coated surfaces. Damage caused by improper assembly or disregard of the manual. Use of spare parts not supplied by manufacturer.
