Specifications

9
Bread maker cycles
Once you start a selected program, the appliance will automatically take care of each step of the bread
making process until the loaf nishes baking. An indicator on the LCD will display the current function:
Delay, Preheat, Knead, Rest, Rise, Bake, Keep Warm or End.
Delay timer
This allows you to delay the bread making process for up to 13 hours. (See ‘Delay Timer’ on page 20 for
further details).
Preheat
Some program require the bread maker to pre-heat. During this time, the unit is heating up.
N.B. This function is not required for all program.
Knead
Three kneads are standard for most settings. The rst knead will actually mix the ingredients; one or two other
short knead cycles will punch the dough down before the rest and rise cycles.
Rest
These are periods of resting in which the unit will not be active except for the countdown display.
Rise
These are periods of rising in which the unit will not be active except for the countdown display.
Bake
The loaf is in the nal baking cycle. Baking time and temperature will be regulated according to the individual
recipe.
Keep warm
The bread maker will automatically go into ‘Keep Warm’ mode at the end of the baking cycle. It will stay in
this mode for 1 hour or until the machine is switched off. This means bread can be served warm; it also helps
to minimise moisture build up if the loaf is if not removed from the machine immediately after baking. Some
crusts will darken slightly in ‘Keep Warm’ mode.