Quick Reference

Bottle Warming
Lift the cover of the unit and remove the measuring cup from the
steam/bottle warming chamber. It is important that you make
sure there is no water in chamber.*
* To empty the unit of excess water open the cover and remove the measuring cup
from the steam/bottle warming chamber. Tilt the unit onto its left side over the sink
and any extra water will come out.
Use the bottle warming side of the measuring cup and ll it with water
to the marked position that coincides with the amount of milk being
warmed using the chart below. Place the bottle in the steam/bottle
warming chamber and turn the dial to STEAM and the LED light will
illuminate.
When warming a narrow bottle, the adapter ring should
be used. (Do not use the adapter ring with glass bottles.)
The unit and the LED light will shut off
automatically once bottle warming is
complete. Turn the dial to the OFF position.
Let the bottle sit for 15
to 30 seconds before
removing the bottle from
the unit. Shake the bottle
to distribute the heated
contents before checking
the temperature.
Always test the
temperature of the food
before serving to baby.
1.
2.
4.
Adapter Ring
Place the adapter ring over
the bottle. Turn the dial to
STEAM. The unit will shut
off automatically once bottle
warming is complete.
3.
Bottle Warming Guide
Bottle Capacity Cool Bottle (refrigerator) Warm Bottle (room temperature)
5ºC/40ºF 20ºC/70ºF
4 oz 12 ml 8 ml
9 oz 12 ml 8 ml
Safety Note: Due to the safety features of this product, the boiler area has to
cool down before it can be used again. When doing consecutive cycles of bottle
warming, to speed up the boiler cooling process, pour 20 oz. of cold water in the
steam/bottle warming chamber and allow to sit for two minutes. When time is up,
tilt the unit onto its left side over the sink and empty.