Quick Reference

ManualsBrandsCuisinart ManualsBlenderBFM-1000

Baby Food Maker & Bottle Warmer

QUICK REFERENCE GUIDE

Steaming

Press the release button on the cover of the unit and liftup to open.

Carefully grasp the plastic hub of the steam blade and insert into

the bowl. Press down rmly to lock.

Remove the measuring cup from the steam/bottle warming

chamber and ll with water to the marked position that coincides

with the amount of food being steamed. Pour the water into the

steam/bottle warming chamber and place the measuring cup

back into the chamber. NOTE: Measuring cup must be replaced

before steaming for the unit to work properly.

See chart on pages 11-13 of the Instruction Booklet for exact water amounts.

NOTE: Never open the cover during food steaming.

Add ingredients to the work bowl and place the bowl lid on top of

the bowl, pushing down to seal. Align the lid handle with the bowl

handle. Lower the cover and press down rmly to lock. Turn the dial

to STEAM and the LED light will illuminate to indicate that steaming

has begun. The unit and LED light will shut off automatically once

steaming is complete. Turn the dial to the OFF position.

Always check the temperature of food before feeding baby.

Summary of content (4 pages)

PAGE 1
QUICK REFERENCE GUIDE Baby Food Maker & Bottle Warmer Steaming 1. Press the release button on the cover of the unit and liftup to open. Carefully grasp the plastic hub of the steam blade and insert into the bowl. Press down firmly to lock. 2. Remove the measuring cup from the steam/bottle warming chamber and fill with water to the marked position that coincides with the amount of food being steamed. Pour the water into the steam/bottle warming chamber and place the measuring cup back into the chamber.
PAGE 2
Chopping/Pureéing 1. Once the steaming cycle is complete open the cover and the lid to make sure the food is tender enough to process. Caution: Unit cover and lid will be hot after steaming. Be careful when opening. 2. Make sure to check the water content of your food before chopping or puréeing. Any leftover liquid can be used to increase the nutritional content and/or achieve the desired consistency. Replace the lid and lower the cover. Press down firmly to lock the unit. 3.
PAGE 3
Bottle Warming 1. Lift the cover of the unit and remove the measuring cup from the steam/bottle warming chamber. It is important that you make sure there is no water in chamber.* * To empty the unit of excess water open the cover and remove the measuring cup from the steam/bottle warming chamber. Tilt the unit onto its left side over the sink and any extra water will come out. 2.
PAGE 4
Cleaning and Maintenance Cleaning Accessories and Motor Base Decalcification r Rinse the work bowl, bowl lid and blade immediately after each use so food won’t dry on them. All can be washed with warm soapy water or on the top rack of the dishwasher. r Avoid leaving blade in soapy water where it may disappear from sight. Wash the blade carefully. r Wipe the motor base clean with a damp sponge or cloth. Dry it immediately. Never submerge the motor base or the plug in water or other liquids.