Instruction & Recipe Booklet Elemental 8-Cup Food Processor - FP-8A Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING When using any electrical appliance, especially when children are present, basic safety precautions should always be taken to reduce the risk of fire, electric shock and/or injury, including the following: • Never leave unattended while cooking to avoid possibility of fire. • This food processor is listed for household use. Use it only for food preparation as described in the accompanying recipe and instruction book.
• The use of attachments not recommended by Cuisinart may be hazardous. • This appliance is not intended to be operated by means of an external timer or separate remote-control system. • At no time, before or during cooking and cleaning immerse unit, plug or cord in water, or any other liquids similarly under running water too – this is to protect against the starting of a fire and electric shock that could induce injury to persons.
PARTS & FEATURES A. S tainless Steel Chopping Blade For chopping, mixing & kneading A B. F ood Pusher Solid at the bottom, to assist pushing food down the feed chute B C. R eversible Medium Slicing Disk For medium shredding or slicing C D. R eversible Fine Slicing Disk For fine shredding or slicing E. L arge Feed Tube Allows for medium to large size food, so precutting is minimalised. D F. 8 -Cup Work Bowl 1.9 litre capacity G.
QUICK TIPS GUIDE Functions Chopping, Mixing & Kneading with the Stainless Steel Chopping Blade Purreéing & Blending with the Stainless Steel Chopping Blade Notes, Tips Tip: F or raw ingredients: peel, core and remove seeds & pits. Food should be cut into even, 2 to 2½cm pieces. Foods cut into same size pieces produce the most even results. Pulse food in 1-second increments to chop. For the finest chop, either hold the pulse down or press High or Low to run the machine continuously.
OPERATING INSTRUCTIONS CLEANING & 1. Always use the appliance on a dry, level MAINTENANCE work surface then place the work bowl on • When not in use, leave unplugged. top of the housing unit with the handle just to the right-of center then turn clockwise to lock it onto the housing base. 2. Carefully lift and place the blade or desired slicing disk (blade facing up) over the work bowl accessory-adapter. Blade or disk should fit comfortably and rest on the bottom of the work bowl. 3.
www.cuisinart.com.au ©2020 Cuisinart Suite 101 Ground Floor 18 Rodborough Rd Frenchs Forest NSW, 2086 Australia Visit our Website: www.cuisinart.com.au Trademarks or service marks of third parties referred to herein are the trademarks or service marks of their respective owners.
