Datasheet

ManualsBrandsCUI INC ManualsPSU ComponentsRail mounted DC/DC converter (DIN) 3.3 V 2.4 A 10 W No. of outputs: 1 x

cui.com

date 08/15/2013

page 1 of 6

SERIES: PYB10-DIN │ DESCRIPTION: DC-DC CONVERTER

date

page 1 of 6

FEATURES

• up to 10 W isolated output

• industry standard pinout

• 4:1 input range (9~36 V, 18~75 V)

• smaller package

• single/dual regulated outputs

• 1,500 Vdc isolation

• continuous short circuit, over voltage protection

• reverse polarity protection

• temperature range (-40~85°C)

• six-sided metal shielding

• efficiency up to 88%

MODEL

input

voltage

output

voltage

output

current

output

power

ripple

and noise

efﬁ ciency

typ

(Vdc)

range

(Vdc) (Vdc)

min

(mA)

max

(mA)

max

(W)

max

(mVp-p)

typ

(%)

PYB10-Q24-S3-DIN 24 9~36 3.3 120 2400 8 80 77

PYB10-Q24-S5-DIN 24 9~36 5 100 2000 10 80 80

PYB10-Q24-S12-DIN 24 9~36 12 42 833 10 80 84

PYB10-Q24-S15-DIN 24 9~36 15 33 667 10 80 85

PYB10-Q24-S24-DIN 24 9~36 24 21 416 10 80 85

PYB10-Q24-D5-DIN 24 9~36 ±5 ±50 ±1000 10 80 81

PYB10-Q24-D12-DIN 24 9~36 ±12 ±21 ±416 10 80 84

PYB10-Q24-D15-DIN 24 9~36 ±15 ±16 ±333 10 80 86

PYB10-Q48-S3-DIN 48 18~75 3.3 120 2400 8 80 77

PYB10-Q48-S5-DIN 48 18~75 5 100 2000 10 80 80

PYB10-Q48-S12-DIN 48 18~75 12 42 833 10 80 84

PYB10-Q48-S15-DIN 48 18~75 15 33 667 10 80 85

PYB10-Q48-S24-DIN 48 18~75 24 21 416 10 80 85

PYB10-Q48-D5-DIN 48 18~75 ±5 ±50 ±1000 10 80 81

PYB10-Q48-D12-DIN 48 18~75 ±12 ±21 ±416 10 80 84

PYB10-Q48-D15-DIN 48 18~75 ±15 ±16 ±333 10 80 86

Notes: 1. Ripple and noise are measured at 20 MHz BW by “parallel cable” method.

PART NUMBER KEY

PYB10 - QXX - XXX - DIN

Input Voltage

Output Voltage

Mounting Type

Base Number

S = single

D = dual

DIN = DIN-rail mount

Output

For more information, please visit the product page.

Summary of content (6 pages)

PAGE 1
For more information, please visit the product page.
PAGE 2
For more information, please visit the product page. CUI Inc │ SERIES: PYB10-DIN │ DESCRIPTION: DC-DC CONVERTER date 08/15/2013 │ page 2 of 6 INPUT parameter conditions/description operating input voltage 24 V input models 48 V input models start-up voltage 24 V input models 48 V input models surge voltage for maximum of 1 second 24 V input models 48 V input models filter pi filter min typ max units 9 18 24 48 36 75 Vdc Vdc 9 18 Vdc Vdc 50 100 Vdc Vdc 3 mA -0.7 -0.
PAGE 3
For more information, please visit the product page. CUI Inc │ SERIES: PYB10-DIN │ DESCRIPTION: DC-DC CONVERTER date 08/15/2013 │ page 3 of 6 ENVIRONMENTAL parameter conditions/description min max units operating temperature see derating curve -40 85 °C -55 125 °C 5 95 % 105 °C storage temperature storage humidity non-condensing case temperature at full load, Ta=71°C vibration 10~55 Hz for 30 min.
PAGE 4
For more information, please visit the product page.
PAGE 5
For more information, please visit the product page. CUI Inc │ SERIES: PYB10-DIN │ DESCRIPTION: DC-DC CONVERTER date 08/15/2013 │ page 5 of 6 APPLICATION NOTES 1. Recommended circuit This series has been tested according to the following recommended testing circuit before leaving the factory. This series should be tested under load (see Figure 3). If you want to further decrease the input/output ripple, you can increase the capacitance accordingly or choose capacitors with low ESR (see table 3).
PAGE 6
For more information, please visit the product page. CUI Inc │ SERIES: PYB10-DIN │ DESCRIPTION: DC-DC CONVERTER date 08/15/2013 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 06/26/2013 1.01 updated spec 08/15/2013 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty.