Manual

2
Safety Instructions
AX1800 Wi-Fi 6 Range Extender
Item no: 2498868
1 Intended use
The product is a Wi-Fi range extender. Use the product to
■
extend the range of an existing Wi-Fi network signal
■
connect network hosts (example: computer) to the local area network (LAN) and the Internet
The following countries impose restrictions on the use of the product:
AT BE BG CH CY CZ DE DK
EE EL ES FI FR HR HU IE
IS IT LI LT LU LV MT NL
NO PL PT RO SE SI SK UK
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the safety instructions and any accompanying instructions carefully and store them in a safe place.
Make this product available to third parties only together with the safety instructions and any accompany-
ing instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Fol-
low the instructions on the website.
3 Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the information carefully.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
Read the information carefully.
4 Safety instructions
Read this document and the accompanying operating instructions carefully and espe-
cially observe the safety information. If you do not follow the safety instructions and
information on proper handling, we assume no liability for any resulting personal in-
jury or damage to property. Such cases will invalidate the warranty/guarantee.
4.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
4.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
4.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
4.4 Electrical safety
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
Connect the product to a mains socket that can be accessed easily.
■
Only connect the product to a mains socket connected to the public supply. Before connecting, check
whether the voltage stated on the rating plate complies with the voltage of your electricity supplier.
■
Never connect or disconnect the product if your hands are wet. There is a risk of electric shock.
■
For safety reasons, disconnect the product from the mains socket during storms.
■
Do not touch the product if there are any signs of damage, as this may cause a fatal electric shock!
Take the following steps:
– Switch off the mains supply to the product (switch off the corresponding circuit breaker or remove
the safety fuse, and then switch off the corresponding RCD protective switch).
– Remove the product from the mains socket.
– Do not use the product again. Prevent others from using it.
4.5 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product con-
forms to the 2014/53/EU directive.
■
Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/
downloads
Enter the product item number in the search box. You can then download the EU declaration of conform-
ity in the available languages.
6 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
7 Technical data
7.1 Power supply
Input ...................................................... 100 - 240 V/AC, 50/60 Hz, 0.3 A
7.2 Wi-Fi module
Wireless frequency ................................ 2.4 GHz: 2.412 - 2.472 GHz
5 GHz: 5.180 - 5.240 GHz
Wi-Fi range ............................................ 2.4 GHz: 100 m
5 GHz: 100 m
Wi-Fi transmission power ...................... 2.4 GHz: 17dBm
5 GHz: 19 dBm
7.3 Environment
Operating temperature .......................... 0 to +40 °C
Operating humidity ................................ 5 - 95 % RH (non-condensing)
Storage temperature .............................. -40 to +70 °C
Storage humidity .................................... 5 - 95 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2498868_V1_0122_jh_ss_en pj-id: 18014398918950283-1 i/o: I3/O1 edtl-id: en