Operating instructions

Please see www.cuddeback.com for details. We
recommend you check our website for updates at
the beginning of your scouting season.
  &IRMWARE6ERSIONnNUMBERSWILLBEDISPLAYED
  SUCHAS4HISISTHElRMWAREVERSION
  4URNTHEROTARYKNOBTOANEWSETTINGORPRESS!TO
return to the battery level display.
Setting Attack Parameters
Some Attack features can be changed by the user. Attack
can also be programmed to become a time lapse camera.
(Note - In the text that follows the underlined items are
default settings. For most users these settings are not
required and you can leave PO set to 0).
Step 0: Enable or disable parameters OR select
Time Lapse Operation
&IRSTYOUMUSTENABLEPARAMETERS4HISISDONEBY
  2OTATEKNOBTO-%.5
  0RESS!UNTIL0ISDISPLAYED0INDICATES
Parameter Zero,WHICHISTHEPARAMETERONOFFCONTROL
  7HEN0ISDISPLAYEDPRESSTHE"KEYTOSELECT
  FROMTHESEOPTIONS
P0:0PARAMETERSARE/&&ANDSETTODEFAULTS
   RECOMMENDEDFORMOSTUSERS
P0:1PARAMETERSARE/.ANDCANBECHANGED
as desired
P0:tL = time lapse mode. Attack is put into time
lapse mode as explained later.
