Owner`s manual

Password Protection prevents an unauthorized
person from using your Cuddeback. Cuddeback
features two passwords, an
owner password and a
lock password. Having 2 passwords allows you to
let a friend use your Cuddeback camera, yet you
prevent them from altering your passwords or
changing the owner name and phone number. This
is accomplished by telling your friend the Lock
Password and not telling them the Owner Password.
The Owner Password is like a master key that is
used to enable setting the Lock Password, Owner
Name, and Phone Number. When shipped from the
factory the Owner Password is 00000 (five zer
os).
Even if you do not change the owner password you
still need to enter the 5 zeros when you want to
change the Lock Password, Owner Name, and
Phone Number.
The
Lock Password will prevent someone from
using your Cuddeback. This password is required
to unlock Cuddeback when it starts. When shipped
from the factory this password is 00000 (five
zeros). When the lock password is 00000 the
unlock feature is disabled (you will not be prompted
to enter a password to use your Cuddeback). If the
Lock Password is set to anything other than 00000,
you will be required to enter the Lock Password to
use Cuddeback.
22
1) Press numerous times until [Camera Setup?
C = Yes]
is displayed (figure 50).
2) Press .
3) Press numerous times until
[Flash Mode] is
displayed (figure 51).
4) Press or to change the setting.
SETTING THE FLASH POWER
Cuddeback's built in flash can be programmed for
high power or standard power. Standard will provide
the highest quality image.
High will provide a greater flash distance.
1) Press numerous times until
[Camera Setup?
C = Yes]
is displayed.
2) Press .
3) Press numerous times until
[Flash Power] is
displayed (figure 52).
4) Press or to change the setting.
31
Flash Mode
Auto
Figure 51
Flash Power
Standard
Figure 52
Camera Set
C = Yes
Figure 50