Instructions / Assembly

That is all you need to do. The HOME camera is now

setup properly. Deploy and ARM the Home camera

(Press MODE unl ARM is selected).

Note—the Home camera must be armed for the CuddeLink network

to funcon.

Set CL LOC to 001. This is a Locaon ID number used to

idenfy each camera. We recommend HOME always be

set to 001.

Skip over CL INFO by pressing MORE

Press UP to set CL LOC to 001

Set CL CHAN to any number. You can leave this at 1 but

we recommend you change this. Pick any channel, but

remember what you selected as all cameras must be set

to the same channel.

Set CL CHAN to any number