Instructions / Assembly

8
Geng Started with CuddeLink
All CuddeLink cameras must have an SD card installed.
The HOME camera saves the images it records & images
from the Remotes cameras on the SD card. We
recommend a 4 or 8GB card. A 4 GB card will hold 10s of
thousands of CuddeLink images.
The REMOTE cameras saves high resoluon images on the
SD card and saves a thumbnail image in a TX_QUEUE
where they are queued for transmission to HOME. A 2GB
card or bigger should be used.
Press MODE then press
MORE
Set up HOME camera
Set the normal camera parameters as explained in the
camera’s manual. Date, me, camera delays, etc.
Set CL MODE to HOME by pressing UP as needed.
Aer CL MODE is set to HOME, press MORE to connue.
Press UP or DOWN to
select Home
This guide assumes you know how to navigate the
camera’s user interface. All the sengs explained in this
secon are in the LINKMENU item. To access the
LINKMENU press MODE unl COMMANDS is selected,
then press MORE unl LINKMENU appears, then press
UP.