Instructions / Assembly
18
• If a signal cannot be received you will need to move
closer to a connected camera. If you never receive a
signal verify the HOME camera is ARMed and the CL
CHAN is set to the same number on all cameras.
CL INFO (Home only) displays the status of nodes on the
CuddeLink network. This was previously discussed in the
Geng Started secon.
CL INFO le. A detailed status report is available on the
Home camera’s SD card. Click the le Cuddelink.html in
the DCIM\400CUDDY folder. Your computer’s web
browser will display a report that shows detailed status of
all cameras on the network.
Look for red & yellow ! symbols on the chart. Those are warnings for
signal strength, baery or SD card potenal issues. Calculang…
indicates that the signal level is not known yet. Links indicates how
many other cameras the images route to get Home.