Instructions / Assembly

16
CL MODE sets the camera’s CuddeLink mode. Choices
are OFF, HOME, REMOTE, REPEATER. Press UP or
DOWN to select, then press MORE to connue
programming addional CuddeLink sengs.
OFF – use this if you do not want this camera to be part
of a CuddeLink network. The CuddeLink radio will be
disabled.
HOME – Set Home on the camera that collects images.
Only 1 camera can be set to HOME.
REMOTE – Set Remote on the cameras that take pictures
and transmit the pictures to the HOME camera.
REPEATER – use this when you need a repeater to
transmit images, but you do not want the camera to
record images. Refer to REPEATER secon laer in this
manual.
CL LOC (LOCATION) assigns a unique number to each
camera on the network. We strongly recommend each
camera has a unique number. Refer to secon CAMERA
NAMING for our recommendaons on how to use this
seng.
CL CHAN (CHANNEL) sets the radio frequency the
cameras use to transmit images. All cameras on your
network must be set to the same channel. CuddeLink
has 16 available channels numbered 1 thru 16. You can
choose any number you like, but do not choose a
channel number used by another network in the
immediate area.