Instructions / Assembly

15
Remote Menu Items
SETTING RANGE DESCRIPTION
CL MODE
OFF, HOME,
REMOTE,
REPEATER
One camera must be set to HOME. All
other cameras must be REMOTE or
REPEATER.
CL LOC 000 thru 999
This assigns a LOCATION ID to each camera.
Assign each camera a unique idencaon
number.
CL CHAN 1 thru 16
Every camera on the network must be set
to the same channel.
CL COUNT
ALL, 25, 50, 100,
250
Sets the maximum number of images that
will be queued to send. Deletes the oldest
images to make room for the newest.
CL LEVEL
Signal strength
- - to 99
Use this to verify the camera is on the
network and how strong the signal is.
CL CLEAR Not Applicable
Press UP and all images queued to transmit
will be erased.
Cauon! Make absolutely sure of the following:
1. All your cameras* are set to the same CL CHAN
2. Each camera has a unique CL LOC number
3. You have a CL LEVEL when you deploy a remote or
repeater.
* Cameras also refers to Repeaters and Home Plus