Instructions / Assembly

12
1st Screen 2nd Screen Explanaon
01 / HOME 001 OK
1
st
node is HOME with CL
LOC 001. Baery is OK.
02 / CAM 005 OK
2
nd
node is a remote
camera with CL LOC 005,
baery OK.
03 / CAM 003 LO
3
rd
node is a remote
camera with CL LOC 003,
baery LO.
Note—CL INFO is also available in the ARMED INFO menu
which is accessed by pressing MORE, UP, or DOWN when the
camera is armed. See camera’s operang manual for details.
CL INFO. It is good pracce to verify that all your cameras
connect to Home. Aer deploying your remotes you
should return to the Home camera and use CL INFO.
Acvate the LINKMENU as previously explained, then
press MORE unl CL INFO. The rst CL INFO display will
show CL INFO and the number of cameras on the
network. From the main CL INFO display press UP and the
status of the rst camera will be displayed. Connue to
press UP to display the status of each camera.
Note - depending upon how many cameras you deployed it may take
several hours for the CL INFO to update. If all Remotes are not shown
you should wait a few hours and check again. If a camera fails to
display see the Troubleshoong secon of this manual.
These 2 displays will
toggle