Instructions / Assembly

10
Set up the REMOTE camera
Set the normal camera parameters as explained in the
camera’s manual. Date, me, camera delays, etc.
Set CL MODE to REMOTE then press MORE.
Press UP or DOWN to
select Home
Set CL LOC to 002. IMPORTANT – all cameras should
have a unique CL LOC (locaon) number. We
recommend you set Home to 1 and set remotes as 2, 3, 4
and so on.
Press UP to set CL LOC to
002
Set CL CHAN to the same channel you set on the HOME
camera. IMPORTANT – all cameras must be set to the
same channel.
Set CL CHAN to same
channel as HOME
Leave CL DELAY and CL COUNT in the default sengs of
CL DELAY 5 and CL COUNT 250.
Leave these set to
defaults