Instruction Manual

CuddeLink Cell Home Quick Set-Up
A quick guide to seng up your CuddeLink Cell Home camera. Certain
menus may appear dierently; this guide references set up of cameras
on version 8.3 rmware.
920-347-3810
www.cuddeback.com
[e-mail]
Cell Home - Recommended Sengs
The following explains the recommended sengs for quick-set up of Cuddeback cameras.
There are a few opons under Commands that you can change, but we recommend leaving them set to default. Leaving them
on default is the recommended opon.
Press Mode key to Sengs, which should ash EZ Mode and is the recommended mode to use for quick set-up.
Press More key and you will see the camera Delay, which is set to 15 seconds and the recommended seng for quick set-up.
The Delay dictates how fast the camera will reload to take an image aer it has already been triggered by heat/moon and
taken an image.
Press More key and you will see the Video seng, which is default set to OFF. We recommend leaving it to o for quick set-
up.
Quick Set-Up - ARM the camera
Press Mode key to ARM. The camera will begin countdown and ARM to take pictures.