Instruction Manual

CuddeLink Cell Home Quick Set-Up
A quick guide to seng up your CuddeLink Cell Home camera. Certain
menus may appear dierently; this guide references set up of cameras
on version 8.3 rmware.
920-347-3810
www.cuddeback.com
[e-mail]
Supplies Needed to Begin Set-Up
1. Required amount of baeries
2. Full-size SD card 2-32GB. We recommend the SanDisk brand
Geng Started
1. Set the Time - Press Mode key to Clock. This should show you the clock. Use the Up/Down ar-
rows to adjust hour seng. Press More key to go to minute seng. Use the Up/Down arrows
to change the minute seng.
2. Set the Date - Press More key twice aer seng me to move to the date. Press the Up arrow
to get to the month. Use the Up/Down arrows to change the month. Press More key to move
to the day. Use the Up/Down arrows to change the day. Press More key to move to the year.
Use the Up/Down Arrows to change the year.
Quick Set-Up - Link Menu
Press Mode key to Commands. Press More key to Link Menu and press the Up Arrow twice to get
into the menu.
The screen should show Link Mode. Use your up arrow to change to Home.
Press More key to move to Link Loc. Use the Up Arrow to change to 001.
Press More key to Link chan. Press the Up Arrow to get to the rst set of digits. Use the Up Arrow to choose a number 1-16.
Press the More buon to get to the second set of digits. Use the up arrow to choose a number 1-31. *This NEEDS to be the
same number for all cameras (Remote/Repeater) that are in the same network... Example 08-20*
Quick Set-Up - Link Menu
Press Mode key to Commands. Press More key to Cell Menu and press the Up Arrow twice to get into the menu.
The screen should show Cell Mode. Use your up arrow to verify this is set to ON.
Press More key to move to Cell Rate. Cell Rate dictates how oen the cell camera will send images to you. 12 Hours is the
recommended default for quick set-up. Use the Up/Down Arrows to change to lower rate if desired.
Press More key to Cell Test. When you deploy the camera in the eld, you will want to run this test. Press the Up Arrow
twice to run the cell test.
**The following instrucons assume you have already created a Cell Management Account and regis-
tered your Cell Camera to your account**
G Series
Cellular