Use and Care Manual

ManualsBrandsCuckoo ManualsAppliances6-Cup Black Twin Heating Pressure Rice Cooker

How to double check whether the packing is well assembled

Since a badly assembled packing can cause the rice to be half-cooked or burned by steam leakage, double check

the packing thoroughly as described below.

(look for parts sticking out of the inner) (look for parts sticking out of outer rim)

(look for parts sticking out of damaged parts)

①

Visual inspection

Normal

assembly

Abnormal

assembly

②

Physical inspection

③

Water boiling test

•

check the entire circumference carefully for any crack or damage

between the Inner Pot lid and the pressure packing.

•

Check if the pressure packing is thoroughly

put into the groove by rubbing the inside

rime of the packing with a finger around the

entire circumference as shown in the

picture above.

•

Pour water in the Inner Pot up to water level 2 (for “Rice”) and press the Menu/Selection button to select the self-cleaning mode.

Then push the HIGH P COOK/TURBO button.

•

Within 10 minutes, the pressure regulator weight will start rattling and hissing while emitting stream. If there is no steam coming out from the

pot other than through the pressure regulator weight the packing has been properly installed.

•

If steam comes out from other parts, stop the test and pull out the power cord. Wait until the pot cools down before removing the pressure

packing from the lid. Once reinstalled repeat the boiling test.

•

For a more precise water boiling test, you can wrap plastic around the circumference of the closed lid. By doing so, you can easily

check where the steam leakage is.

•

If you still have a problem with reassembling the packing, please contact our Customer Service.

•

Check if the pressure packing is properly

put into the groove of the Inner Pot lid by

pushing the outer rim with a finger around

the entire circumference as shown in the

picture.

•

Check if the pressure packing is thoroughly

put into the groove by pushing the inside of

the rim packing with a finger around the

entire circumference as shown in the

picture.

Normal

assembly

Abnormal

assembly

HOW TO CLEAN