Operating instructions

25
CCAAUUTTIIOONN FFOORR SSAAFFEETTYY
CAUTION
ENGLISH
Do not use over the maximum capacity.
▶It can cause overflow or breakdown.
After you are finished with cooking the rice,
do not try to open the cooker by force until
the steam is completed exhausted.
▶The hot steam or any hot content
within the cooker can cause burns.
▶Be careful with burn by the steam
when you open the top cover after
cooking done.
Don
’’
t use the cooker near the
magnetic field. Do not drop
the cooker or impact.
▶It can cause burn or breakdown.
▶It can cause the safety problem.
Please contact dealer or service center
when strange smell or smoke is occurred.
▶First pull out the power cord.
Please use the cooker for original purpose.
▶It can cause the transformation or smell.
Please clean the body and
other parts after cooking.
▶It can cause the
transformation or smell.
Do not touch the metallic surface of the inner
pot and pressure weight after
cooking or warming.
▶It can cause burn.
▶ Romaining hot steam can
cause burn when you tilt the pressure
weight while and right after the cooking.
Do not pull up the cooker by holding the
inner pot handle.
▶If can cause problems and dangerous situation.
There is portable handle on bottom right and left side
of the cooker. Hold the handle with both hands and
move it carefully.
▶Use the portable
handle.
Be careful automatic steam exhausting.
▶When steam exhausting,
don’t be surprised.
▶Please keep the cooker
out of reach of children.
Don
’’
t use to be used for various purpose
for inner pot.
▶It can cause the transformation of inner pot
▶It can cause to spill the inner coating.
The coating of the inner pot may peel off.
▶The coating of the inner pot may peel off do to
prolonged use.
▶When cleaning the inner pot,
do not use tough scrubber,
metallic scrubber, brush,
abrasive metallic etc.
(Refer to page 37)
Always turn the Lock/Unlock
Handle to "Lock" until not in use.
▶It can cause the transformation
by remaining pressure.
Please surely pull out plug when not in use.
▶It can cause electric shock or fire.
▶Use AC120V only.