Instructions

24
TO KEEP COOKED RICE WARM AND TASTY
Controlling Method of Warming Temperature
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even
though it is cleaned frequently and boiled up. Temperature needs to be set.
How to Operate My Mode Function.
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low. In this
case, increase the “Keep Warm” temperature by 1-2
℃
.
2. When the rice has a yellowish color or is too dry: The Keep Warm temp is too high. In this case
decrease the “Keep Warm” temperature by 1-2
℃
.
❶ In standby mode, push the ‘MODE’ button 4times. The voice says that it is
programmed warming mode, control the temperature you want.
❸ Select the menu you want, then the press the ‘SET’ button and set-up time will
be automatically entered with a buzzer. (If you press the ‘CANCEL’ button or do
not press a button within 7 seconds, the function will be cancelled and returned
to standby mode.)
❷ Press the Menu/Selection button so that the display shifts
Having a Meal
▶ If you want to have warm rice, press the “Reheat/keep”warm. Then “Reheat/keep”warm function will be started
and you can eat fresh rice in 9 minutes.
▶ The frequent use of the “Reheat” function may cause the cooked rice to be discolored or dried. Use it once or twice per day.
▶ If a separate heating appliance or gas burner is used to cook rice, put the cooked rice into the rice cooker and press the “Keep
Warm/Reheat” button to keep the rice warm. At this time, “ ” is shown on the display. (Like this, transferring hot rice to a cold
cooker may cause the rice to be discolored or develop an odor)
Use it while opening the lid when there is too much water or rice becomes too soft.
❶ Press 'MODE' button once(1) during warming mode, or press 'Mode' button
three(3) times during standby mode. It displays as picture with buzzer. At the
time, means current warming temperature.
❸ After setting temperature, press ‘SET’ select button. Preset temperature will
be stored with buzzer sound. (If will be cancelled once press ‘CANCEL’ button
or after 7 seconds without pressing any button)
❷ Press Menu/Selection button so that the display shifts
Device Temperature Control
1. If too much water is spilled out when you open the lid : Press “Menu/Selection” button to raise the setting mode.
2. If the edge of rice is too soft : Press “Menu/Selection” button to reduce the setting mode.
“ ” on display means that the
cooked rice has been kept warm
for 3 hours.
The remaining reheat time will
show in minutes while the Keep
Warm light is blinking with the
“ ” sign on display twirling.
When reheating is done, Keep Warm function
will start with the voice that says “ ”, and
the amount of time that the Keep Warm has
been functioning will be displayed.
<Keep warming>
<Reheating>
<Finishing reheat>
※ The reference temperature programmed when the product is
shipped may differ from the Instruction.
➡➡