Use and Care Manual

To keep cooked rice warm and tasty
21
ENGLISH
Controlling method of warming temperature
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even
though it is cleaned frequently and boiled up. Temperature needs to be set.
Press the Time/Temp button for one second or longer before adjusting the keep warm temperature.
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low. In this case, increase the “Keep
Warm” temperature by 1-2℃.
2. When the rice has a yellowish color or is too dry: The Keep Warm temp is too high. In this case decrease the “Keep Warm”
temperature by 1-2℃.
How to operate my mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
1. If too much water is spilled out when you open the lid: Increase the Customized Warming step by one or two steps.
2. If the edge of rice is too soft: Increase the Customized Warming step by one or two steps.
When Odors are Rising During the Warming Mode.
▶ Clean the lid frequently. It can cause growth of bacteria and odors.
▶ Even if the product looks clean on the outside, germs may grow everywhere to smell during the Keep Warm mode.
Thus, if the product smells, add water in the inner pot up to the water level of two portions, add a tablespoon of
vinegar, close the cover, select Auto Clean, and press the Cook button. After the Auto Clean function is completed,
the inner pot must be washed completely.
▶ If you don't wash the inner pot after Multi Cook or after cooking soup or cake and then use the Keep Warm function,
the food may smell or stink.
If you press the Time/Temp button for one second or longer in the Standby
mode, the product will enter the "Warm Temp( )" Setting mode.
1
In the "Warm Temp" setting mode, the currently set temperature is displayed.
2
Select a desired temperature for keeping warm with the +/- buttons, and press the Cook button.
3
After entering the "Warm Temp" setting mode, if seven seconds pass without any button pressed
or if you press the Cancel button, it will be canceled and the product will return to Standby mode.
※ Its factory setting is "74℃" and you can set it as needed.
4
Press the Time/Temp button twice in the Standby mode, and the product
will enter the "Customized Warming( )" setting mode.
▶ Initially, the “time / temperature” button must be pressed for more than one
second to enter.
1
In the "Customized Warming" setting mode, the currently set status for keeping warm is
displayed.
2
Select the desired step of Customized Keep Warm with the +/- buttons, and press the Cook
button.
3
After entering the "Customized Warming" setting mode, if seven seconds pass without any
button pressed or if you press the Cancel button, it will be canceled and the product will return to
the Standby mode.
4
※
I
t
s
f
a
c
t
o
r
y
s
e
t
t
i
n
g
i
s
"
S
t
e
p
0
"
a
n
d
y
o
u
c
a
n
s
e
t
i
t
a
s
n
e
e
d
e
d
.