Use and Care Manual

How to Replace the Filter

After completing the filter replacement, close the side cover and

allow water to pass through the water faucet.

(Water can pass only if the lever is open).

*Close the Water Storage Tank Valve when flushing the filters.

Open the Water Storage Tank Valve when flushing is completed.

Case 1.

When replacing the Sediment and sediment 3.0 Filters : Allow water to pass through

for about 5 minutes.

Case 2.

When replacing the Pre carbon block 3.0 and Natural 3.0 Filters : Allow water to

pass through for about 7 minutes.

Case 3.

When replacing the Reverse Osmosis Filter : Connect the Reverse Osmosis Filter to

the previous filters, Allow water to pass through for about 10 minutes.

Case 4.

When replacing all filters : Allow water to pass through for about 10 minutes.

※ In case of Reverse Osmosis (RO), let the water pass through the external drain

water control valve.

※ In case of Reverse Osmosis (RO), be careful as there are two water outlet each

for purified water and drain water.

※ It is important to supply the purifier with water to check for any water leaks after

filter replacement.

▶ Make sure that water Is passed through for more than the recommended time

to ensure the desired water quality.

▶ Once the process of passing water through the filter is complete, supply tap

water and use a soft cloth, etc. to check If there is any water leakage.

OPEN