Use and Care Manual

10
Details to Check before Installation
Details to Check before Installation
Do not place the product in direct
sunlight or near a heating product.
▶ This may cause color changes or fire.
1
Allow installation space.
▶
To allow convenient replacement of the filters, make sure
the product is placed 20cm away from the wall and that
the distance of the water supply hose connecting the
product to the water supply valve is less than 5m.
2
Avoid areas with high moisture/humidity,
dust or water splash.
▶ This may cause a malfunction.
3
Avoid areas that is uneven, inclined or
not solid.
4
Avoid areas where the temperature falls below 0 ℃.
▶
This product is for indoor use. If the surrounding
temperature falls below 0 ℃ , it may cause the filters
and/or the internal components to freeze, causing
breakdown of the product.
5
Cautions when Installing the Product
Please be careful when moving the product.
▶ Do not tilt the product at an angle over 45º.
Cautions on Moving the Product
Connect the tube to the cold water pipe.
▶ Connecting the hose to the hot water pipe may
cause damage to the filter or breakdown of the
product.
▶ Refer to How to Install the Product (Page 11) for
how to connect the tube.
Cautions on Connecting the Tube
* Use the following steps in order to avoid spilling
water when disassembling the tubing.
Turn Off Water Supply → Lock Water Storage Tank Valve → Turn Filter Door Valve
to OPEN → Disassemble tubing