Instructions / Assembly

ENGLISH
33
www.cuckoo.co.kr
HoW To disassemble and sTore / HoW To use in WinTer
How to Disassemble and Store
How to Use the ElectronicBidetSeat in Winter
Pull out the Power Plug from the Power Outlet.
1
Use a coin to loosen the drain plug on the bottom of
the ElectronicBidetSeat body and drain the water
from the hot water tank completely.
4
Disassemble the Water supply hose, the T-Valve,
and the Catch plate.
5
Connect the Water Supply Pipe to the Water Supply Valve.
6
Open the Water Supply Valve by turning it counterclockwise, and check if there is
water leakage from the Water Supply Pipe Connection Unit.
7
Assemble the toilet seat and the cover, which have been disassembled when you
installed the ElectronicBidetSeat, on the toilet.
8
Put the Power Plug in the Power Outlet, and check if power is supplied to the Main
Frame.
1
Press the "Water Temp" button. Do not turn off the hot water temperature
completely but set above "Level 2".
2
When not using for a long time, drain the hot water tank.
3
Close the Water Supply Valve by turning it clockwise.
2
Loosen the nut on the T-Valve side of the Hose for
the ElectronicBidetSeat, and disassemble the Main
Frame of the ElectronicBidetSeat from the toilet.
※ How to Disassemble the ElectronicBidetSeat With your hand
pressing the Lever, pull out the product forward.
3
※ If you need to disassemble the product from the toilet because of moving to another house or cleaning,
follow the following instructions.
Water Supply Valve
② Pull it forward
Lever
① Press it