User Manual
FUNCTION INTRODUCTION
11
www.cuckooworld.com
KEEP WARM
After baking program is complete, the bread machine will beep 10 times and shift to its Keep Warm setting for 1
hour. After 60 minutes, 0:00 will be shown on the LCD display.
To cancel the Keep Warm setting, press and hold the START/STOP button for 3 seconds.
TIP: Removing bread immediately after baking program is complete will prevent the crust from getting darker.
BEFORE THE FIRST USE
Wash and dry the bread pan and kneading paddle
Note: Do not use metal utensils in bread pan since they may damage the non-stick surface.
CAUTION! Falling Object Hazard. Bread maker can wobble and walk during kneading cycle. Always position it
in the center of counter away from the edge.
1. Check for any missing or damaged parts.
2. Clean all the parts according to “CLEANING AND MAINTENANCE”.
3. Set the bread maker on bake mode and let it bake empty for about 10 minutes. Once you let it cool, clean all
the detached parts again. The appliance may emit a little smoke and/or odor when you turn it on after the first
time. This is normal, and it will subside after the first or second use. Make sure the appliance has sufficient
ventilation.
4. Once you dry all parts thoroughly and assemble them, the appliance is ready for use.
WARNING DISPLAY
This warning means that the temperature inside of the bread pan is too high.
Press START/STOP button to stop the program, unplug the power cord,
open the top lid, and let the machine cool down completely for 10-20 minutes
before restarting.
This warning means that the temperature sensor is disconnected. Press the
START/STOP button to stop the program, then unplug the power cord.
Please check the sensor with the nearest authorized service agent for any
examination, repair, or electrical /mechanical adjustment.
POWER INTERRUPTION
I
n the event of a power outage, the process of making bread will automatically continue within 10 minutes, even
if you don't press the START/STOP button. If the interruption time is longer than 15 minutes, the unit will not
c
ontinue running and the LCD display will revert back to its default setting. If the dough has started rising, discard
the ingredients in the bread pan and start over. If the dough has not started rising when power was interrupted,
p
ress the START/STOP button to continue the program from the beginning.
1팀 이상엽_개발-2017.qxp_레이아웃 1 2020. 12. 29. 오후 3:14 페이지 11