User's Manual

Security Alert
Under some circumstances, turn assist system may not able to detect the
vehicles. The alert may not be functional under the following situations;
therefore, please drive carefully and stay safe.
• Interruption by the equivalent frequency of the signal from airports,
exercises, and military areas nearby may cause the radar malfunction.
• High speed vehicles enter into the blind zone may not vehicles that
passing by in close succession or closely following may not provide an
alert.
• Vehicles that passing by in close succession or closely following may
not provide an alert.
• When a vehicle comes from behind a corner, the angle of the blind area
of the vehicle body is close to the adjacent lane or the vehicle behind; it
may provide a false alert for the vehicle behind.
• Under the narrow bends, bridge piers, or arched road situations, the
system may not be able to detect incoming vehicles in real-time since
the angle between the vehicle and other vehicles is not in the blind zone.
• When entering a curve or turning, the radar may warn vehicles in the
next lane (due to the rotation of the radar with the angle of the car body).
• Under bushes or construction fences are not ordinary road situations;
radar may launch false alarms.
False Alarm
Under the following circumstance or similar conditions, the system may
launch a warning, even though there is no vehicle appear in the blind zone; it
is a temporary false alarm normally; the false alarms may be launched in the
following situations:
• Wall
• Traffic light pole
• Bushes
• Construction fence
• Continuous uphill and downhill road
• Narrow curves or turning road
• Guiding guardrail or road guardrail
Other Information
• Import：EU local representative: *****／Address: *****
• Frequency range: 76GHz~77GHz
Operating temperature: -40~+85°C
• Maximum RF output power of the product EIRP=29.96 dBm
• Hereby, Cubtek declares that the radio equipment type B122-036 is in
compliance with Directive 2014/53/EU.
• The full text of the EU declaration of conformity is available at the
following internet address: https://www.cubtek.com/en/certification.aspx