Operation Manual

USB cable
CUBOT V2 band
ulna
Cubot V2 Users Manual
1. Activate(for the first time) and wear
1.1 Please connect the band with USB cable ,then charge by inserting into computer port or the
charger ,which activates the band .
1.2 When the band has been activated ,it shows the interface like :
1.3 Put the band at the right place and make sure your ulna is exposed , the heart rate sensor at back need
clinging to your skin .
2. Hardware features :
2.1 Touch and use
Touch the screen ,brighten it
Slide from left or right ,touch the screen to have page turning ,then you check all function interfaces .