Operation Manual

Creating an account on Cubify.com is easy and gives you access to all of the great designs and collections that will drive

and inspire your creativity. Once you have set up an account you will be able to activate your Cube by entering your Cube’s

individual serial number in the designated bar under the Activate My Cube tab. An activation code will then be sent to

the email account you used to register. This code will be used to unlock your Cube so that you can get your 3D printing

underway.

NOTE: If you do not receive an activation code email, please check your spam lter settings.

1. Go to Cubify.com and log in to your account or click Sign Up to create an account.

2. Click on Activate My Cube from My Cubify drop down menu.

3. Enter your 12-character serial number (digits and letters found on the back of your Cube), then click Activate.

4. Your Cube’s serial number is now activated on Cubify.com and your Cube will be assigned to your Cubify account. Your

activation code will be displayed, and also sent to you in an e-mail along with links to help you get started creating.

Make sure the email doesn’t get caught in your spam lter!

5. Using the links from your activation code email, or the My Cubes section in your account, you can download:

• The Cube Software, which turns your 3D models into a le that the Cube can print. The software must be

installed on your computer. Your Cube won’t print without it!

• 25 free, ready-to-print 3D les created by top artists and designers (also on your USB stick)

• Cube 3D Printer User Guide (also on your USB stick)

• Material Safety Data Sheets

6. Now it is time to unlock your Cube so you can begin creating.

NOTE: If you use a PC, you need Microsoft

Windows

7 or XP (SP3+). If you use a Mac, you need Mac OSX 10.8+

7 LINK YOUR CUBE TO YOUR CUBIFY ACCOUNT