Operation Manual

WEIGHT & DIMENSIONS
• Weight (without cartridge): 4.3 kg (9.5 lbs.)
SOFTWARE
• Complimentary software for Windows and Mac OSX.
This application converts your 3D model into layered
slices (G-code), ready for printing on your machine.
MINIMUM HARDWARE REQUIREMENTS
• A PC with these minimum requirements will be
required to run the Cubify Software
• Processor: Multi-core processor - 2 GHz or faster
per core
• System RAM: 2 GB
• Screen Resolution: 1024x768
WINDOWS REQUIREMENTS
• Cubify Software runs on 32 and 64-bit Operating
Systems
• Windows XP Professional or Home Edition with
Service Pack 3
• Windows 7
• Windows is required for ad-hoc WiFi Print Job
submission. NOTE: Ad-Hoc WI-FI connection will
not connect to Windows XP operating systems
• If not already installed, the Cubify Software installer
will automatically install the Microsoft .NET 4.0
Framework
WIRELESS OPTIONS
• 802.11b/g with: WLAN Infrastructure or Ad hoc
Mode.
NON-WIRELESS OPTION
• USB Memory Stick, to transfer print les (supplied
with the Cube)
MAC OSX REQUIREMENTS
• Cubify Software runs on Mac OSX 10.8
ELECTRICAL REQUIREMENTS
• Outlet requirements: 100-240 Volts, at 50/60 Hz.
• Cube electrical rating: 24V DC, 3.75 amp.
MATERIAL STORAGE
• All polymers degrade with time. The following
conditions ensure the material remains high quality:
• Do not unpack until material is needed.
• Store at room temperature: 16-29° C (60 - 85° F)
OPERATING ENVIRONMENT
• Room Temperature: 16-29° C (60 - 85° F)
• Nozzle- 280°C (536°F)
• Print Pad- 66-77° C (150-170°F)
13
11.25” (28.6 cm)
8” (20.3 cm) 8” (20.3 cm)
8” (20.3 cm)
8” (20.3 cm)
10” (25.4 cm)
13” (33 cm)
5 REQUIREMENTS FOR YOUR CUBE
WALL