User Manual

5500-62017.A.00
This document contains proprietary and confidential information originated or owned by Cubic. Neither this document nor the information disclosed herein shall be reproduced or transferred
to other documents or used or disclosed to others for manufacturing or any other purposes except as specifically authorized in writing by Cubic.
27 Oct 0
5
1
1. INTRODUCTION
1.1 SCOPE
The purpose of this Cubic Transportation Systems, Inc., (Cubic) Design Information Bulletin (DIB) is to
provide the mechanical and electrical design details of the Cubic Driver Control Unit Version 2 (DCU2).
This document will be maintained by revision and updates as the design progresses. Specific
references to suppliers may be changed for the final product configuration.
1.2 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS
ABS Acrylonitile Butadiene Styrene
AVL Automatic Vehicle Location
CID Card Interface Device
CPU Central Processing Unit
Cubic Cubic Transportation Systems, Inc.
DCB Driver Control Board
DCU Driver Control Unit
DIB Design Information Bulletin
DRAM Dynamic RAM
EIDE Enhanced Integrated Device Electronics
EMC Electromagnetic Compatibility
GPS Global Positioning System
I/O Input/Output
IEEE Institute of Electrical and Electronic Engineers
IVLU Intelligent Vehicle Control Unit
LCD Liquid Crystal Display
LV Light Validator
MTBR Mean Time Between Failure
MTTR Mean Time To Repair
PCB Printed Circuit Board
PCMCIA Personal Computer Memory Card International Association
POR Power-on Reset
SBC Single Board Computer
SICB Smart I/O Control Board
SMA S
ub Miniature version A—a type of connector
SOM System On Module
STN Super Twist Nematic
USB Universal Serial Bus
VGA Video Graphic Array
WLAN Wireless Local Area Network