User Manual

5500-62017.A.00
This document contains proprietary and confidential information originated or owned by Cubic. Neither this document nor the information disclosed herein shall be reproduced or transferred
to other documents or used or disclosed to others for manufacturing or any other purposes except as specifically authorized in writing by Cubic.
27 Oct 0
5
13
COM2 RS422/485 & COM4 RS485 Interface or COM2 RS422/485 & 12VDC Aux interface
(manufacturing configurable) – DB9 connector
PIN SIGNAL PIN SIGNAL
1 C2 485DATA- 2 C2 485DATA+
3 C2 422RX+ 4 C2 422RX-
5 GND 6
7 C4 485DATA+ 8 C4 485DATA-
9 485GND
GPS antenna – SMA connector
Note ensure this connector in secured such that it cannot rotate when attaching antenna cable
Power input - 6 Pin Molex type (looking at the DCU2 connector panel)
654
321
PIN SIGNAL PIN SIGNAL
6 CAPACITOR VCC 3 CHASSIS GND
5 BATTERY VCC 2 BATTERY GND
4 BATTERY VCC 1 CAPACITOR GND
Power input - 4 Pin Molex type for compatibility (looking at the DCU2 connector panel)
PIN SIGNAL PIN SIGNAL
4 BATTERY GND 2 BATTERY VCC
3 BATTERY GND 1 BATTERY VCC