Quick Use Guide

Quick use guide

Model: Cubibot

Congratulations!

In this brief guide, we’re going to show you how to set up and make your first model

on the new Cubibot Desktop 3D Printer.

Your purchase comes with a complimentary, live training session with one of our

technicians. For advanced users, see our website for tips & tricks.

We’re so excited to see what you make!

1. In the Box

Cubibot Print material power adapter

2. Where to Set Up

Use the provided power cable to plug your printer into a surge protector or

uninterrupted power supply.

Pro automatically goes to sleep to save energy after a period of inactivity. Interaction

with the touchscreen or sending a print job will reactivate it.

Use the power switch if you need to perform a hard reset or disconnect your Pro from

its power source.

PAGE 1
Quick use guide Model: Cubibot Congratulations! In this brief guide, we’re going to show you how to set up and make your first model on the new Cubibot Desktop 3D Printer. Your purchase comes with a complimentary, live training session with one of our technicians. For advanced users, see our website for tips & tricks. We’re so excited to see what you make! 1. In the Box Cubibot Print material power adapter 2.
PAGE 2
3. Plug in power Use the provided power cable to plug your printer into a surge protector or uninterrupted power supply. Pro automatically goes to sleep to save energy after a period of inactivity. Interaction with the touchscreen or sending a print job will reactivate it. Use the power switch if you need to perform a hard reset or disconnect your Pro from its power source. 4.
PAGE 3
Cured resin can be discarded as regular trash. Never dispose of liquid resin in your sink or other plumbing. Resin should not be left out of the bottle for more than three days. If it has been exposed to air for less than three days, it is safe to pour it back into the bottle through a paper filter or loose mesh. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.