User's Manual

CubiSens

N-Series AH100 User Manual

Updated April 2019

Page 9 / 11

5. Motion Detection Sensitivity Setting

The motion sensor inside AH100 can be configured for different sensitivity. The range is 64-2047. Lower

number indicates a more sensitive setting, where each LSB corresponds to 1mg. The default value is 96.

Using lower value than the default may result in false triggers under certain conditions.

6. Automatic Motion Alarm Muting

The AH100 activity detector features an automatic motion alarm muting function, which prevents

excessive battery drainage from continued motion triggers. This can be useful if the sensor is exposed to

a high vibration environment for extended periods of time (such as driving) or if the motion sensitivity

setting is set incorrectly. If the time between consecutive motion detection events is less than 50% of the

Check-in interval, the motion muting count will be incremented. If this count exceeds the user-defined

threshold (3 by default), motion detection will be “muted”, meaning no further motion detected messages

will be sent until the next wakeup event (e.g. check-in). The motion muting count will be reset at the next

wakeup event.

To change this threshold:

1. Go to the “Configure” tab

2. Enter the “Motion Muting Count” value

3. Press “Motion Muting” button

Configuring Motion Sensitivity

Configuring Automatic Alarm Muting Count