User's Manual

CubiSens

N-Series AH100 User Manual

Updated April 2019

Page 3 / 11

Setup

1. What’s in the Box

Each AH100 kit contains the following:

• AH100 Sensors

• CubiSens Gateway

• 915MHz Antenna

• Optical Programmer

• Monitor

• Gateway Power Cable

• Monitor Power Cable

• Ethernet Cable

• DP-HDMI Cable

• USB Cable

2. Connecting Devices (Normal Operation)

Please follow the steps below to connect the antenna to the gateway and power on the system:

1. Connect the antenna to the ANT1 port

2. Connect the ethernet cable to ETH1 port

3. Plug in the power adapter to Gateway’s DC2 port

CubiSens Gateway

DC2 and ANT1 ports should be used