User's Guide

To connect the device via USB using
the Q-CONN magnetic connector:
Simply plug the Q-CONN connector to the mating connector on the back of the steering
wheel. Make sure the USB-A end is connected to your pc.
Turn the steering wheel on via the dedicated button.
Start-up animation will be shown on the steering wheel, and the PC should immediately
recognize the USB device.
To connect the device via BLE:
Make sure the coiled cable is disconnected from the steering wheel.
Turn on the steering wheel via the dedicated button.
Start-up animation will be shown on the steering wheel, and BLE status led should flash.
This means the wheel is in discovery mode or waiting to connect.
Open the Bluetooth devices on your PC and click “add device”.
Click on the “Bluetooth” option and wait for the device to show up in the device list.
Select the F-PRO and wait for the pairing to end.
Once paired, each time the device is turned on it will automatically connect to the PC.
Operating range is usually around 10 meters but it will be reduced if obstructions are present
6