Users Manual

4
2. Product Introduction
As large vehicles have a larger size, they would generate more blind spots. When turning, the drivers cannot view the
pedestrians and vehicles entering the blind zones caused by the inner wheel difference, leading to frequent traffic
accidents. The “Difference of Radius between Inner Wheels” of a vehicle is a disparity between the inner front
wheel’s turning radius and the inner rear wheel’s turning radius when it turns. Due to the presence of the inner wheel
difference, when the vehicle turns, the motion trajectories of the front and rear wheels do not coincide. If you only pay
attention to the passable space of the front inner wheel but forget the inner wheel difference while turning, it may
cause an accident, causing the rear inner wheel to drive off the road or collide with other objects.
In response to this problem, this product comes with a set of blind spot sensors for installing on the left and right sides
of the vehicle exterior to detect the blind spots caused by inner wheel difference and the left and right blind spots of
the vehicle body based on different speeds and conditions when driving. The system can also provide active warnings
through visual and audible alerts to remind the drivers to pay attention to other vehicles when they enter the detection
zones, thus protecting the safety of passengers and pedestrians.
The safety assist functions provided by this system include:
■ BLIND SPOT DETECTION (BSD)
■ LANE CHANGE ALERT (LCA)
■ WIDE-TURN ASSIST (WTA)