Blind Spot Detection and Turn Assist System User Manual A009-007
Contents 1. Disclaimer ............................................................................................................................................................................ 3 2. Product Introduction ............................................................................................................................................................ 4 3. System Specifications ..........................................................................................................
1.Disclaimer ① Before using this product, please read the instructions and warnings carefully, and ensure to use the product correctly. ② Although this product offers blind spot detection and warning functions, it may still provide sporadic false alarms or does not report due to factors such as the driving area, environment, driving behavior, road conditions, weather, and other factors. Hence, this product does not guarantee 100% detection and warning accuracy.
2. Product Introduction As large vehicles have a larger size, they would generate more blind spots. When turning, the drivers cannot view the pedestrians and vehicles entering the blind zones caused by the inner wheel difference, leading to frequent traffic accidents. The “Difference of Radius between Inner Wheels” of a vehicle is a disparity between the inner front wheel’s turning radius and the inner rear wheel’s turning radius when it turns.
3. System Specifications 3.1 System contents 1. Sensor (Single Radar) 2. Sensor (Combo Radar) 3. BSD Indicator (Left) 4. BSD Indicator (Right) 5. WTA Indicator 6. Cable set 7. Accessories x1 x1 x1 x1 x1 x 1 set x 1 set 3.
4. System Operation 4.
4.2 WIDE- TURN ASSIST Upon activated (ACC ON), this system will start to operate and detect the conditions around your vehicle at any time. When your vehicle is turning at a low speed (between 0-29km/h or 0-18mph), the system will start the wide turn assist detection. The detection range and zones are shown below. Approximately a lane wide The path of inner wheel difference depends on the amount of steering wheel input.
when you start accelerating your vehicle after stopping at the traffic light, it indicates that there may be a vehicle coming towards you at ahead on the right. Please drive cautiously to avoid accidents. The motorcycle is driving towards your turning path and may collide with you. ◆ When you turn on the turn signal light and wish to make a turn, this system will increase its alert level.
4.3 BSD and LCA If you are driving at a speed exceeding 30km/h (19 mph), this system will detect the blind spots on both sides of your vehicle. If there is a vehicle entering the detection zones, the system’s blind spot indicators will light up to give a warning. If you turn on the turn signal light and wish to change lane, the system will increase its warning level, and the blind spot indicators will give warning flashes.
