ZT-2800 Hydro-Gear Transaxle

ZT-2800
®
/ZT-3100
®
/ZT-3200
TM
/ZT-3400
®
13ZT-2800
®
13
WARNING
Do not attempt any servicing or ad-
justments with the engine running.
Use extreme caution while inspecting
the drive belt assembly and all vehicle
linkage!
Follow all safety procedures outlined in
the vehicle owner’s manual.
WARNING
POTENTIAL FOR SERIOUS INJURY
Inattention to proper safety, operation, or
maintenance procedures could result in
personal injury, or damage to the equip-
ment. Before servicing or repairing the
transaxle, fully read and understand
the safety precautions described in this
section.
RETURN TO NEUTRAL SETTING
      
      




       
    
󰀨

NOTE: It may be necessary to remove the
drive tire from the axle hub to access the
linkagecontrolandthetransaxlereturnarm.
Removethewheelbyremovingthelugnuts.
Donotremovetheaxle/hubnut.
 -







        



      -
      
  

-


Figure 7, Return to Neutral Setting
w


ROTATION "B" ROTATION "A"