Product Manual

21
SERVICE AND MAINTENANCE
WARNING
Before performing any type of maintenance/service,
disengage all controls and stop the engine. Wait until all
moving parts have come to a complete stop. Disconnect
spark plug wire and ground it against the engine to prevent
unintended starting. Always wear safety glasses during
operation or while performing any adjustments or repairs.
Before
Each Use
After
First 5
Hours
After
First 50
Hours
Every
10
Hours
Every
25
Hours
Every
50
Hours
Every
100
Hours
Every
250
Hours
Prior to
Storing
See
Engine
Manual
Check/Clean Engine Intake
Screens & Cooling Fans #
P P
Check/Clean Exhaust
Manifold, Muer Pipe, &
Muer Shields #
P P
Check/Clean Top and
Underside of Deck, Under &
Around Spindle Covers,
Belt Area #
P P
Check/Clean Around Fuses,
Wiring &Wiring Harnesses #
P P
Check/Clean Around
Transmission, Axle & Fans #
P P
Change Transmission Oil &
Filter (Tu Torq Transmission)
P P
Check Air Filter for Dirty,
Loose or Damaged Parts
P
Check Engine Oil Level
P
Clean Battery Terminals
P P
Grease All Lubrication Points
P P
Check Engine Intake Screen/
Clean AsNeeded
P P
Check Blades/Sharpen or
Replace AsNeeded
P P
Check Tire Pressure
P P
Check/Clean Underside
of Deck
P P
Check Safety Interlock System
P P
Check Mower Blade Stop Time
P P
Inspect & Lube Deck Wheels
P P
Check Deck Level/Pitch
P P
Check Belts & Pulleys for
Damage/Wear
P
Check That All Hardware Is In
Place & Secure
P
Follow the maintenance schedule given below. This chart
describes service guidelines only.
Refer to the Engine Operator’s Manual for engine maintenance
items listed in the table below.
NOTE: Maintenance schedule continues onto the next page.