Instruction Manual

Body
21
14. Disconnect the deck lift assist spring.
See Figure 4.11.
NOTE: The lift assist spring exerts a lot of force.
15. Remove the nuts and bolts that hold the utility bin
bracket to the control console using a pair of 1/2”
wrenches.
See Figure 4.12.
16. Remove the two screws that hold the rear of the con-
trol console to the seat box assembly using a T-30
torx driver and a 7/16” wrench.
See Figure 4.13.
NOTE: The upper screw goes through a reinforcement
plate for the lift assist spring.
Figure 4.11
Lift assist spring
Figure 4.12
Nuts
1/2” wrench
Figure 4.13
Screws