Operator`s manual

10 Section 2— ASSembly & Set-Up
2. Remove the two shoulder bolts and lock nuts in the seat

Figure 3-3
 Rotate the seat into position and secure the seat into place
with the previously removed shoulder bolts and lock nuts.


Figure 3-4
Adjusting the Seat
To adjust the position of the seat, push the seat adjustment lever
to the left. Slide the seat forward or rearward to the desired
position; then release the adjustment lever. Make sure seat is

Figure 3-5
Install the Rear Hitch Bracket
 Remove the hex flange screws and flange lock nuts that
secure the hitch bracket and muffler mount bracket to the

Hex Flange
Screws
Flange
Lock
Nuts
Hitch
Bracket
Muffler Mount
Bracket
Figure 3-6