User guide

T2
®
33
Refer to Figure 27
Disassembly
1. Remove the expansion tank hose (141).
2. Remove the O-ring (142) from the expan-
sion tank tting (140) and discard.
3. Remove the expansion tank tting (140).
Inspection
1. Inspect the tting for damage and replace
if necessary.
Assembly
1. Install the tting into the main housing. Refer
to torque chart on page 15.
2. Install a new O-ring (142) onto the tting.
3. Place the expansion tank hose (141) onto
the tting (140).
EXPANSION TANK HOSE AND FITTING
Figure 27, Expansion Tank Hose and Fitting
141
142
140