SDS

Product Name: SJ 10W-30
Revision Date: 15 Mar 2015
Page 5 of 8
______________________________________________________________________________________________________________________
SECTION 9
PHYSICAL AND CHEMICAL PROPERTIES
Note: Physical and chemical properties are provided for safety, health and environmental considerations only
and may not fully represent product specifications. Contact the Supplier for additional information.
GENERAL INFORMATION
Physical State: Liquid
Colour: Brown
Odour: No Characteristic
IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION
Relative Density (at 15 C): 0.88
Flash Point [Method]: >200C (392F) [ ASTM D-92]
Flammability (Solid, Gas): N/A
Auto ignition Temperature: N/D
Vapour Pressure: < 0.1 kPa ( mm Hg) at 20 °C
Viscosity: 9.5 cst (9.5 mm2/sec) at 100C
Freezing Point: N/D
Melting Point: N/A
Decomposition Temperature: 320C
SECTION 10
STABILITY AND REACTIVITY
STABILITY: Material is stable under normal conditions.
CONDITIONS TO AVOID: Excessive heat. High energy sources of ignition.
MATERIALS TO AVOID: Strong oxidisers
HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures.
POSSIBILITY OF HAZARDOUS REACTIONS: Hazardous polymerization will not occur.
SECTION 11
TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
Route of Exposure
Conclusion / Remarks
Inhalation
Toxicity: No end point data for material. Minimally Toxic. Based on assessment of the components.
Irritation: No end point data for material. Negligible hazard at ambient/normal handling temperatures.
Ingestion
Toxicity: No end point data for material. Minimally Toxic. Based on assessment of the components.
Skin
Toxicity: No end point data for material. Minimally Toxic. Based on assessment of the components.
Irritation: No end point data for material. Negligible irritation to skin at ambient temperatures. Based on
assessment of the components.
Eye
Irritation: No end point data for material. May cause mild, short-lasting discomfort to eyes. Based on