MSDS

ManualsBrandsCub Cadet ManualsKitchen22 in. 159 cc Gas Walk-Behind String Trimmer

MATERIAL SAFETY DATA SHEET

Revision Date: 10/10/2002

SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

PRODUCT:

MTD SAE 30 Motor Oil

MSDS NUMBER: 55065E - 1

PRODUCT CODE(S): 55065

MANUFACTURER TELEPHONE NUMBERS

Shell Oil Products US Spill Information: (877) 504-9351

P. O. Box 4453 Health Information: (877) 276-7285

Houston, TX. 77210-4453 MSDS Assistance Number: (877) 276-7285

SECTION 2 PRODUCT/INGREDIENTS

INGREDIENTS CAS# CONCENTRATION

Motor Oil Mixture 100 %weight

Hydrotreated heavy paraffinic distillate 64742-54-7 90 - 99 %weight

Proprietary additives Mixture 1 - 3 %volume

SECTION 3 HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

Appearance & Odor: Amber liquid. Petroleum oil odor.

Health Hazards: No known immediate health hazards.

Physical Hazards: No known physical hazards.

NFPA Rating (Health, Fire, Reactivity): 0, 1, 0

Hazard Rating:Least - 0 Slight - 1 Moderate - 2 High - 3 Extreme - 4

Inhalation:

Inhalation of vapors (generated at high temperatures only) or oil mist may cause mild irritation of the nose, throat, and

respiratory tract.

Eye Irritation:

Lubricating oils are generally considered no more than minimally irritating to the eyes.

Skin Contact:

Lubricating oils are generally considered no more than minimally irritating to the skin. Prolonged and repeated contact

may result in defatting and drying of the skin that may cause various skin disorders such as dermatitis, folliculitis or oil

MTD SAE 30 Motor Oil

Page of

MSDS# 55065E

Summary of content (9 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Revision Date: 10/10/2002 SECTION 1 PRODUCT: MTD SAE 30 Motor MSDS NUMBER: 55065E - 1 PRODUCT CODE(S): 55065 MANUFACTURER Shell Oil Products US P. O. Box 4453 Houston, TX.
PAGE 2
acne. Ingestion: Lubricating oils are generally no more than slightly toxic if swallowed. Other Health Effects: The International Agency for Research on Cancer (IARC) has determined there is sufficient evidence for the carcinogenicity in experimental animals of used gasoline motor oils. Handling procedures and safety precautions in the MSDS should be followed to minimize exposure to the used product. Signs and Symptoms: Irritation as noted above.
PAGE 3
apparatus. SECTION 6 ACCIDENTAL RELEASE MEASURES Protective Measures: May burn although not readily ignitable. Wear appropriate personal protective equipment when cleaning up spills. Refer to Section 8. Spill Management: FOR LARGE SPILLS: Remove with vacuum truck or pump to storage/salvage vessels. FOR SMALL SPILLS: Soak up residue with an absorbent such as clay, sand or other suitable material. Place in non-leaking container and seal tightly for proper disposal.
PAGE 4
Adequate ventilation to control airborne concentrations below the exposure guidelines/limits. Personal Protection Personal protective equipment (PPE) selections vary based on potential exposure conditions such as handling practices, concentration and ventilation. Information on the selection of eye, skin and respiratory protection for use with this material is provided below.
PAGE 5
Hazardous Decomposition Products: Thermal decomposition products are highly dependent on combustion conditions. A complex mixture of airborne solids, liquids and gases will evolve when this material undergoes pyrolysis or combustion. Aldehydes, Carbon Monoxide, Carbon Dioxide, Ketones and other unidentified organic compounds may be formed upon combustion. SECTION 11 TOXICOLOGICAL INFORMATION Acute Toxicity OSHA Classification TEST Result Material Tested Dermal LD50 >5.
PAGE 6
Not regulated under IATA rules. International Maritime Organization Classification Not regulated under International Maritime Organization rules. SECTION 15 REGULATORY INFORMATION Federal Regulatory Status OSHA Classification: Product is hazardous according to the OSHA Hazard Communication Standard, 29 CFR 1910.1200, because it carries the occupational exposure limit for mineral oil mist.
PAGE 7
Revision#: 1 Revision Date: 10/10/2002 Revisions since last change (discussion): This Material Safety Data Sheet (MSDS) has been newly reviewed to fully comply with the guidance contained in the ANSI MSDS standard (ANSI Z400.1-1998). We encourage you to take the opportunity to read the MSDS and review the information contained therein. SECTION 17 LABEL INFORMATION READ AND UNDERSTAND MATERIAL SAFETY DATA SHEET BEFORE HANDLING OR DISPOSING OF PRODUCT.
PAGE 8
FOR LARGE SPILLS: Remove with vacuum truck or pump to storage/salvage vessels. FOR SMALL SPILLS: Soak up residue with an absorbent such as clay, sand or other suitable material. Place in non-leaking container and seal tightly for proper disposal.
PAGE 9
AGENCY. WE WILL NOT PROVIDE ADVICE ON SUCH MATTERS, OR BE RESPONSIBLE FOR ANY INJURY FROM THE USE OF THE PRODUCT DESCRIBED HEREIN. THE UNDERLYING DATA, AND THE INFORMATION PROVIDED HEREIN AS A RESULT OF THAT DATA, IS THE PROPERTY OF SHELL OIL PRODUCTS US AND IS NOT TO BE THE SUBJECT OF SALE OR EXCHANGE WITHOUT THE EXPRESS WRITTEN CONSENT OF SHELL OIL PRODUCTS US.