Engine Service Manual

65
Reassembly
14 690 10 Rev. -- KohlerEngines.com
Install Fuel Pump (if equipped)
D
C
A
H
F
H
A
I
E
F
E
G
B
C
A In-Nipple Fuel Filter B Fuel Pump C Screw D Inlet Fuel Line
E Tee Fitting F Vent Hose G Fuel Pump Bracket H Nut
I Outlet Fuel Line
NOTE: If a new fuel pump is being installed, make sure orientation of new pump is consistent with removed pump.
Internal damage may occur if installed incorrectly.
1. Connect vent hose to valve cover fi tting.
2. Position fuel pump bracket on stud in crankcase and stud in speed control bracket. Secure with lock nuts. Torque
nuts to 8 N·m (71 in. lb.).
3. Route vent hose through hose clip on fuel pump bracket.
4. Attach vent hose to fuel pump. Connect inlet and outlet fuel lines to pump. Position hose clamps to secure.
5. Secure fuel pump to fuel pump bracket. Torque screws to 2.3 N·m (20 in. lb.).