Manual

LTX Tractors

4. Disconnect the harness plugs from the following

electrical devices under the dashboard:

See Figure 4.41.

• Hour meter

• Key switch

• RMC module

• PTO switch, if so equipped

5. Use a phillips head screwdriver to remove the throt-

tle control grip. See Figure 4.42.

6. Carefully peel-off the throttle control label.

• Gentle application of heat will help loosen the

adhesive.

• Use wax paper to preserve the adhesive.

7. Remove the two Torx

head screws that hold the

throttle control to the dash panel using a T-27 driver.

See Figure 4.43.

Figure 4.41

Hour meter

RMC Module

Key switch

PTO switch

Figure 4.42

Throttle grip

Throttle control

label

Figure 4.43