Manual

LTX Tractors
122
C. Remove the bolt that holds the PTO clutch to
the engine crankshaft using a 5/8” wrench.
See Figure 6.69.
NOTE: An impact wrench and socket will be most
effective. Otherwise it may be necessary to
block the ring-gear to prevent the crankshaft
from turning .
D. Carefully lower the PTO clutch and any asso-
ciated hardware. See Figure 6.70.
E. Slide the pulley off of the engine crankshaft.
The belt will clear the belt keepers as the pul
-
ley comes down. See Figure 6.71.
Figure 6.69
Crankshaft bolt PTO Clutch
! CAUTION! CAUTION
The PTO clutch is heavy, and it
may fall as the bolt is removed.
Figure 6.70
Washers (2)
PTO clutch
Crankshaft bolt
Figure 6.71
Belt keepers